Luthra Hydro Pneumatics

Advanced Engineering Tubing

AP-MIX-Push-in-Fittings
Semiconductive Antisaticgrade Tube in Polyamide PA12

HP is a new generation fitting studied to guarantee tightness with pressure ranges, considered so far “out of reach” with the push in version.

The fitting has been created and developed to be used in the Lubricant systems. Thanks to the innovative gripping system of the collet, our HP push in fitting can stand up to a maximum of 250 bar pressure.


the raw material used to producethese tubes is according to: - US Regulation - FDA 21CFR section 177.1550 and 21CFR section 178.3297 - European Regulation EC1935/2004 and UE10/2011 - Directive EEC 2011/65 (RoHS)

PHYSICAL/MECHANICAL PROPERTIES TRIAL METHOD VALUE
Hardness DIN 53505 - ISO868 95 ShA / 48 ShD
Water absorption 23°C 50% r.h. < 1%
Density DIN 53479 - ISO1183 1,22 g/cm3
Elongation at break DIN53504 - ISO37 550%
Tear resistance DIN53515 - ISO34 100 N/mm
Flexural elastic modulus ASTMD 790 100 MPa
Abrasion loss DIN 53516 - ISO4649 30 mm3
Break resistance DIN53504 - ISO37 55 MPa
Working temperature - - 40°C / +60°C